CNG Kit (C. LAID)

Specifications
CNG conversion kit
CNG single point conversion kits
CNG sequential system kits
ECU kits
Our products:
CNG ConVERSION KIT CNG kit

Reducer TX-R23
With electronic coil
Working voltage:DC12V
Working pressure:Gas inlet≤20Mpa
Output pressure:0-0.3Mpa Output flow≥100m3/h Ambient Temperature:-40°C-120°C 1
Injector rail TX-I09
Woring pressure:0.8-2.5bar,
Line-loop resistance valve:3ohm Voltage:12V 1
ECU TX-E06
(AC system) Including Cable, and software Operation
Temperature:-40°C-100°C
Supply Voltage:DC12V Weight:0.54kg
Connecotr:Plug
Available for 4.6.8 cylinder application 1
CNG filling valve TX-T3H
Working pressure:20Mpa,
PN:20Mpa, DN:4mm,
Outlet joint:Ferrule type hole 6,
Inlet joint:Piston type hole 12 1
The LPG filter TX-F02 It is apply for CNG/LPG, Max working pressure:4.5bar, working temperature:-40°C- +120°C 1
Pressure gauge TX-CB08
Accuracy grade:2.5,
Output signal:±0.25V,
Scale on the meter:0-400bar/6000psi,
Voltage:DC(12±2V) 1
High pressure tube TX-H07 6*1*6m 1
Water tube TXT03 8×1.5m 1
Low pressure tube TXT01 10×1.5m 1
Tube TXT02 5×1.5m 1
Vacuum tube TXT04 4×1m 1
Ripples tube TXT05 29×1.6m 1
Parts bag Spare parts to fix for cars 1